The Lion’s Den is one of our most popular pre-designed Catio enclosures!
With 92 inches of depth, 46 inches of width, and 92 inches of height, is it a great all-around enclosure with significant kitty activity space. Outfitted with 7 adjustable shelves and a floor (both made from cedar), it can be configured to best suit your needs. It works great as a standalone enclosure or to easily connect to a tunnel, stairs, or tower to a window or door.
Please note that additional accessories such as awnings, hammocks, ramps, and scratching posts are not included with the catio kit but can certainly be purchased separately!
1 four-sided enclosure (92″D x 46″L x 92″H)
3 adjustable shelves (46″L)
4 adjustable shelves (92″L)
6 planks of cedar for the floor
1 door (24″W x 60″H)
Pliers, fasteners, and installation instructions.
Our enclosures are made from durable galvanized steel mesh panels that are then powder-coated black to ensure a long-lasting weatherproof finish.
Floor and Shelves:
Our shelves and floor are cut to size and made from cedar, naturally resistant to water, bugs, rot, and mold. It is the ideal material choice for outdoor catio shelving and flooring.
Human Entry Doors:
The access doors are 2 feet wide and 5 feet tall. This purposely small door is designed small for a reason. It is installed 4 inches off the ground as well. The door has been tested since 2003 as the most effective way to force the person entering to be mindful of their surroundings. When you enter a door like this, you will naturally be careful of where you step, what is above you, and to the side. All of this awareness has proven time and time again to minimize any would-be kitty escapes during entry. The swing of the door (left or right-hand swing) is adjustable and can be set to either option during assembly.
Holes for Tunnels, Towers, Stairs, etc.:
Component holes are not cut where the tunnels, bridges, stairs, and other components meet the enclosures. Since the mesh is relatively easy to cut on-site during assembly, we leave the choice of where these holes are located up to you so you can position them as you see fit. This also avoids costly mistakes being made and/or accommodates site issues discovered during assembly.